Abstract:
A 36 m Small Angle Neutron Scattering (SANS) Spectrometer
(SMARTer) has been installed in Serpong, Indonesia in 1992. As time
goes by, the original main computer was out of order and the instrument
had not been operated since 2003.
In order to activate the SMARTer, in
the year 2005, a work on designing and constructing a new control system
for SMARTer was carried out. The main component of this control system
is a programmable peripheral I/O (IC PPI 8255) and was assembled as a
plug-in board at an ISA slot of a personal computer. An IC PPI 8255 was
programmed to control the mechanical movements of the instrument’s
components: four neutron guide tubes, six pinholes collimator, a
detector and a beam stopper. The test either with or without neutron
beam has shown that this control system can be implemented for the
mechanical movements of SMARTer. Error of moving the detector in the
distance range of 1.5 m – 18 m is only 1 mm and the other movements have
no error at all (precise).
Keywords: Control system; Neutron spectrometer; Computer
E Santoso, EGR Putra
Center For Technology of Nuclear Industry Material National Nuclear Egency Agency,
Center For Technology of Nuclear Industry Material National Nuclear Egency Agency,
Puspiptek Area, Serpong, Tangerang
0 komentar:
Posting Komentar